i have a hobby prestiege touring ,the problem i have is that the pump to the water tank under the sink.
i have a 25lt can in the under sink cuboard which is attatched with a pump then wired to an on/of switch then there is a wire leading from the switch back towards the fuse board this is not connected. there is also a small battery pack near the fuse board with pp3 x2 batteries in it wired up to a connector block, there was also a 12volt transformer to, not wired to anything !when connecting the transformer to the switch wire the pump worked but the transformer cut out after a few minutes..can any one tell me how to wire up the pump properly.
many thanks for reading this
allan123
