The Caravan Owners Club

[bobbyboot]

hi my fuse holder has broken off my circuiit board can anybody give me some help as l cannot repair this myself my hobby 635 is sited in trearddur bay thanks

[esdave]

Hello my names Dave electronics engineer, I have helped many people on this forum and others as esdave I repair all types/makes of charger/ power supplies 63 to date this year, and any other type of leisure electronics ie caravan mover circuit boards and many others , so you see I can and will help you , if you can use a soldering iron with my help you can do it, first could you tell me your make and model of your power supply ie DOMETIC and I will tell you step by step procedure if you prefer you may ring me or contact me via my website , Regards Dave

[bobbyboot]

hi dave l am not any good with a soldering lron and can you tell where to get a fuse holder cheers

[bobbyboot]

hi dave it is a hobby 635 2004

[esdave]

Hello, thats ok if you have never used a soldering iron, but it is a lot easier than it looks , ok lets go another way first can you tell me the make and model number of your power/charger/ converter , sorry but telling me the caravan type does not mean much to me I only know about the electronic systems and can not link these with the caravans/motor homes/ boats, so if you can give me this information I can tell you more , obtaining a fuse holder is no problem ,if the one off the pcb is not broken this can be resoldered back in Regards Dave

[bobbyboot]

hi dave l am not at the van the fuse melted in the holder when l try to pull it out it came off

[esdave]

Hello Yes that will need a new fuse holder and to also check why this heated up, so when you can please let me know make/model of power unit and I will give you more information, Regards Dave

[bobbyboot]

cheers dave